Six Tips for Repairing an Industrial Vacuum

0
2537

About 40-50 million industrial vacuum pumps are sold every year in the US. More homeowners have realized the benefits of having robot cleaners.

The industrial vacuum cleaner makes cleaning around your premises much easier. Now, you can even fit in more tasks in your day.

That’s why it can be quite irritating when the industrial vacuum pumps lose their suction power. When this happens, it’s best to consult professionals to help you with the repair.

Repairing it in the wrong way can lead to permanent damage. Keep reading to grasp six tips for repairing an industrial vacuum.

1. Unclog the Brush Head

If your industrial robot vacuum isn’t picking up any dirt, debris might have clogged the head. Check the brush head before you reach out for any professional help.

Examine the floor head for any animal fur or fluff. These can sometimes block the airways interfering with the suction force. A jammed brush head can cause more damage to the belt.

Turn off the power source before you start cleaning the head. It will be easier to fix this mess if your vacuum has a removable brush bar.

Free the brush roll from any dirt accumulation with your hands. If you are afraid of contamination, you can use gloves. After you have removed all debris, you can reset the motor circuit.

Ensure that there is no damage to the belt while doing so. If the tips don’t work, contact a reliable vacuum pump rebuild service.

2. Check the Power Source

When the vacuum cleaner won’t turn on it could mean dealing with an electrical problem. Some cleaners are cord electric but other ones come with batteries. Dead batteries could be the reason why you can’t turn on your machine.

Besides, you could have plugged cords in the wrong outlet. Test for a faulty outlet before alarming any professionals. If the problem is with the vacuum, you might have to replace a few faulty cords.

For battery-powered vacuums, check the charge levels of the batteries. Sometimes, loose connections could lead to this problem.

Most homeowners forget to disconnect the robot vacuum from the onboard charger. However, the machine won’t run if it’s still connected to the charger.

3. Check the Dust Container

The brushes and power sources could be functional but the vacuum won’t suck in any water. Engineers design vacuum cleaners to pick both liquid and solid matter. Yet, sometimes your machines can have a problem with absorbing the liquids.

What most operators don’t know is that the machine can’t absorb any dirty solution if the tank is full. The float blocks any suction force.

Thus, the most ideal move is to empty the recovery tank. Once it’s drained, check the water pickup rate of the vacuum. If the industrial robot vacuum is still leaving water behind, it could be an issue with the hose.

4. Check Your Filters

Clogging up of filters is one of the main causes of loss of suction They can even result in the breakdown of the motor.

Common types of vacuum cleaners come with two filters. One is at the rear near the exhaust, motor filter, and the other type, the allergen filter is near to the dust container.

Inspect the filters and clean them at least once a month to prevent the build-up of debris. With self-cleaning filters, all you need is to twist them to remove dirt.

Machine users favor a washable filter more because of its functionality. You can remove them and rinse them in water as allowed by the manufacturer. Ensure the filters are completely dry before you can put them back.

If you notice that your filters are too worn out then it might be time to replace them.

5. Fixing Your Belt

When you encounter an issue with the vacuum pump, you better get it fixed right away. Otherwise, it’ll only result in bigger problems.

If you have cleaned all the debris from the vacuum and the machine is still not working, it could be a belt malfunction. The vacuum belt is useful in driving the brush bars.

The belt can break as a result of turning the machines on when the brushes were clogged. But don’t stress over this issue, fixing the belt is an easy task. You can let professionals handle the belt replacement for you.

If you decide to do it yourself, make sure that you order the replacement belt from a trusted supplier. It must match the original model number of your machine.

Unhinge the old belt carefully from the pulley system after removing the brush bar. After that, fit the new belt and screw everything else back in place.

6. Replace the Dust Container

If your dust container is full, it’s a surprise that your industrial vacuum sealer is still functioning. The suction power can drop even if the dust container is only half full.

It’s wise to empty a bagless industrial vacuum cleaner after every use. Most cordless pumps don’t have much capacity.

If you check the max lines on the canister, you’ll find that they don’t even reach half of the container. Thus, their suction power can reduce easily.

With bagged vacuums, you can replace the bag to restore the suction force. However, these are one of the things that you must be critical about when buying a vacuum.

Choose a model that isn’t affected much by the volume of the dust container. Bagged vacuum cleaners prove to be durable in the long run.

Industrial Vacuum Rental

If your industrial pump isn’t as efficient as it used to, debris might be clogging it up. The build-up of fur and dust in industrial vacuum cleaners can lead to other bigger issues.

It’s wise to inspect for any clogs regularly and sort this issue first. If cleaning out the filters and brushes won’t work, you might have to replace the belt.

It’s advisable to outsource professionals to avoid causing permanent damage to the industrial vacuum pumps.

Interested to learn more about industrial vacuum cleaners? Stay on this website for more articles like this.